Non - Woven Fabric Material Roll Converting / Slitting Machine With
Arc - Shaped Clamping Unit
This tissue paper converting machine is suitable for cutting
non-woven fabric material roll by equipped with special arc-shaped
clamping device. It is characteristic of neat cutting and high
Main functional features:
1. Applied with one infeed lane and servo motor to meet various
product cutting length as needed.
2. Change the parameters on the operation screen to change the
different product cutting width.
3. Pneumatic-driven product belt pressing unit can be adjusted in
its up-down height.
4. With special arc-shaped clamping device, it can prevent product
5. Time setting function is available which can be set on the
6. On the infeed lane an emergency button is equipped against
7. Auto blade grinding function is available.
8. Speed is regulated by inverter.
9. The total system is controlled by PLC with big size touch screen
for easy parameters setting and
10. Equipped with safety protection door, the machine will stop
automatically when the door is opened.
11. Photocell tracking of product material feeding and detection of
product edge scraps in operation.
12. Product edge scraps can be rejected automatically by detection.
13. Auto stop against no material feeding or abnormal feeding.
|Paper cutting length||85-300mm|
|Paper cutting width||80-120mm|
|Paper cutting height||40-140mm|
|Paper cutting speed||10-140cuts/min|
|Power supply type||AC380V/50HZ/3PH|
|Installed power||9 KW, AC 380 V/ 50-60 Hz, 3ph.|
|Blade motor power||5.2 KW, AC 380 V/ 50-60 Hz, 3 ph.|
|Servo motor power||1.5 KW, AC 380 V/ 50-60 Hz, 3 ph.|
|Step motor power||1.5 KW, AC 380 V/ 50-60 Hz, 3 ph.|
|Control system||PLC + HMI (Siemens/Germany), Servo (Delta/Taiwan)|
|Feeding mode||Timing belt positioning transmission, Servo drive (Delta/Taiwan)|
|Feed lane||One single lane.|
|Cutting mode||360° rotary movement, continuous cutting|
|Blade movement||1090 rpm.|
|Blade sharpening||Automatic sharpening and lubricating|
|Blade outer diameter||Φ 610mm|